D-Link DXS-3600-EM-8T CLI Guide - Page 124

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 7-67 show ip as-path access-list This command is used to display configured AS-path access-lists. show ip as-path access-list [ACCESS-LIST-NAME] Parameters ACCESS-LIST-NAME (Optional) Specifies the access list to be displayed. The length is up to 16 characters. Default Command Mode Command Default Level Usage Guideline None. Privileged Mode. Level: 3. (EI Mode Only Command) This command can be used without any arguments or keywords. If no arguments are specified, this command will display all AS-path access-lists. However, when the ASpath access-list name is specified when entering the show ip as-path access-list command. This option can be useful for filtering the output of this command and verifying a single named AS-path access-list. Example This example shows how to display the content of IP AS-path access-list. DXS-3600-32S#show ip as-path access-list BGP AS Path Access List: a1 permit ^300$ deny ^200$ Total Filter Entries: 2 BGP AS Path Access List: a2 permit 3*0$ deny 20 Total Filter Entries: 2 BGP AS Path Access List: a3 permit 1 Total Filter Entries: 1 Total AS Path Access List Number: 3 DXS-3600-32S# Display Parameters BGP AS Path Access List permit deny Total Filter Entries Total AS Path Access List Number Description Indicates the name of the BGP AS path access list. Indicates that the packets will be accepted if there AS-PATH attribute match the regular expression specified. Indicates that the packets will be rejected if there AS-PATH attribute match the regular expression specified. Indicates the total number of entries of a specifically AS path access list. Indicates the total number of the AS path access lists. 116