D-Link DXS-3600-EM-8T CLI Guide - Page 665

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 72-8 route-target This command is used to add one route target of a VRF. Use the no form of this command to remove one route target. route-target {import | export | both} route-target no route-target {import | export | both} route-target Parameters import export both route-target Specifies to add an import route target to import routing information from the target VPN extended community. Specifies to add an export route target to export routing information to the target VPN extended community. Specifies to add both an import route target and an export route target. Specifies the value of the route target. Default Command Mode Command Default Level Usage Guideline By default, no route target is specified for one VRF. VRF Configuration Mode. Level: 15. This command is used to add a route target to one VRF. One VRF can have multiple route targets. Use the command show ip vrf detail to check the settings. Example This example shows how to create a VRF instance VPN-A and add an import and export target. DXS-3600-32S#configure terminal DXS-3600-32S(config)# ip vrf VPN-A DXS-3600-32S(config-vrf)# route-target import 100:1 DXS-3600-32S(config-vrf)# route-target export 100:1 72-9 show ip vrf This command is used to display the VRF settings. show ip vrf [{details | interfaces}] [vrf-name] Parameters details interfaces vrf-name N/A (Optional) Specifies to show detailed information about one or more VRFs. (Optional) Specifies to show interfaces associated with one or more VRFs. (Optional) Specifies to show information associated with one VRF. Specifies to display brief information about all VRF instances. Default Command Mode Command Default Level Usage Guideline None. Privileged Mode. Level: 15 This command is used to check the settings of VRF instances. 657