D-Link DXS-3600-EM-8T CLI Guide - Page 590

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide encrypted-password Specifies the encrypted password used. This password can be up to 26 characters long. Spaces will be ignored, however, if there is spaces before and after the password, they will be considered part of the password. Default Command Mode Command Default Level Usage Guideline No password encryption is applied. Global Configuration Mode. Level: 15 None. Example This example shows how to enable a password with the privilege level of 15. DXS-3600-32S#configure terminal DXS-3600-32S(config)#enable password level 15 12345 DXS-3600-32S(config)# 59-10 service password-encryption This command is used to encrypt the password used. The no form of this command restores to the default value. service password-encryption no service password-encryption Parameters Default Command Mode Command Default Level Usage Guideline None. By default, no encryption is applied. Global Configuration Mode. Level: 15 Various passwords are displayed in the form of plain text, unless it is directly configured in the cipher text form. After executing the service passwordencryption command, the password will transform into ciphered text. Example This example shows how to encrypt the password used. DXS-3600-32S#configure terminal DXS-3600-32S(config)#enable password level 15 12345 DXS-3600-32S(config)#service password-encryption DXS-3600-32S(config)# 59-11 show privilege This command is used to display the current privilege level used. show privilege Parameters Default Command Mode Command Default Level Usage Guideline None. None. EXEC Mode. Level: 1 None. Example This example shows how to display the privilege level used. DXS-3600-32S#show privilege Current privilege level is 15 DXS-3600-32S# 582