D-Link DXS-3600-EM-8T CLI Guide - Page 62

Usage Guideline DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Once the default exec accounting method list has been configured, it is applied to all terminals automatically. Once the non-default exec accounting method list has been configured, it is applied to the line instead of the default method list. If you attempt to apply an undefined method list, a warning message will prompt that the exec accounting in this line is ineffective till the exec accounting command method list is defined. Example This example shows how to configure the EXEC accounting method list, with the name of 'list-1', that uses the RADIUS server. If the security server does not response, it will not perform accounting. After the configuration, EXEC accounting is applied to the console. After applying the login method list, 'list-1', to the console, when a user logs in from the console, it sends the account start information to the security server when the user has logged into the NAS's CLI. It also sends the account stop information to the security server when a user logs out. DXS-3600-32S#configure terminal DXS-3600-32S(config)#aaa accounting exec list-1 start-stop group radius DXS-3600-32S(config)#line console DXS-3600-32S(config-line)#accounting exec list-1 DXS-3600-32S(config-line)# 6-10 ip http authentication aaa This command is used to specify an AAA authentication method for HTTP server users, use the ip http authentication aaa command in global configuration mode. To disable a configured authentication method, use the no form of this command. ip http authentication aaa {exec-authorization {default | list-name} | login-authentication {default | list-name}} no ip http authentication aaa {exec-authorization | login-authentication} Parameters exec-authorization login-authentication default listname Specifies to configure the method list for exec authorization. Specifies to configure the method list for login authentication. Specifies to configure the default method list. Specifies to configure the name of the method list. Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 15 The 'ip http authentication aaa' command specifies the AAA authentication method to be used for login when a client connects to the HTTP server. The local, RADISU and TACACS+ methods should be specified using the 'aaa authentication login' command. 54