D-Link DXS-3600-EM-8T CLI Guide - Page 512

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows how to remove an alarm entry. DXS-3600-32S#configure terminal DXS-3600-32S(config)#no rmon alarm 100 DXS-3600-32S(config)# 51-4 rmon event This command is used to add an event entry. Use the no form of this command to remove an event entry. rmon event number [log] [trap community] [description description-string] no rmon event number Parameters number log trap community description descriptionstring Specifies the event index in the range of 1 to 65535. Specifies to record the event. Specifies to send the trap message to the NMS when the event is triggered. Specifies the community string used for sending the SNMP trap message. Specifies the description of the event. Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 12 Add the RMON event information on the switch. Example This example shows how to add an event entry. DXS-3600-32S#configure terminal DXS-3600-32S(config)#rmon event 100 log trap public description test DXS-3600-32S(config)# Example This example shows how to remove an event entry. DXS-3600-32S#configure terminal DXS-3600-32S(config)#no rmon event 100 DXS-3600-32S(config)# 51-5 show rmon statistics This command is used to monitor basic statistics information. show rmon statistics Parameters Default Command Mode Command Default Level None. None. Privileged EXEC Mode. Level: 3 504