D-Link DXS-3600-EM-8T CLI Guide - Page 587

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 59-3 username This command is used to set a local username database for the purpose of authentication. username name {{nopassword | password {password | encrypted encrypted-password}} | privilege privilegelevel} no usename name Parameters name nopassword password {password | encrypted encryptedpassword} privilege privilege-level Specifies the name of the access database name. Specifies to identify that no password will be set. password - Specifies to identify the plain text password. encrypted - Specifies to identify that the password entered is encrypted. encrypted-password - Specifies to identify that the password entered is a encrypted password. Consists out of 1-26 letters in upper/lower case and numerals. Leading spaces are allowed but ignored. Spaces in between or at the end are regarded as part of the password. Specifies to identify the privilege level that will be entered when you use this username to login. If not specified, the privilege level is 1. Default Command Mode Command Default Level Usage Guideline By default, there is no username or password configured on this switch. Global Configuration Mode. Level: 15 This command is used to create a local user database for the purpose of authentication. Example This example shows how to create a username and password. DXS-3600-32S#configure terminal DXS-3600-32S(config)#username user password 12345 DXS-3600-32S(config)# 59-4 login local This command is used to set the line login method. login local no login local Parameters Default Command Mode Command Default Level Usage Guideline None. By default, this option is disabled. Line Configuration Mode. Level: 15 When a user wants to use a username to enter the device on any line, we need to set the login method as login local. If no username was created, the interface will notify the user that no username is configured after which the switch will login automatically without asking for a username and a password. Example This example shows how to DXS-3600-32S#configure terminal DXS-3600-32S(config)#line console DXS-3600-32S(config-line)#login local DXS-3600-32S(config-line)# 579