D-Link DXS-3600-EM-8T CLI Guide - Page 149

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Display Parameters Description Next Hop Self Indicates whether the local BGP enable the router as the next hop for the neighbor. Description Show the description configured to describe the neighbor. Password Show the password set on the TCP connection to the neighbor. Peer Group Indicates which peer group the neighbor belongs to. Address Family IPv4 Unicast Indicates that the configuration below is only for IPv4 unicast address family. IPv4 Unicast Indicates whether the local BGP enable the exchange of information with a Border Gateway Protocol (BGP) neighbor in IPv4 unicast address family. None (IPv4 Unicast) Indicates that the local BGP does not exchange IPv4 unicast information with the neighbor. Advertised (IPv4 Unicast) Indicates that the local BGP advertise its IPv4 unicast information to the neighbor. Received (IPv4 Unicast) Indicates that the local BGP receive the IPv4 unicast information from the neighbor. Address Family VPNv4 Unicast Indicates that the configuration below is only for VPNv4 unicast address family. VPNv4 Unicast Indicates whether the local BGP enable the exchange of information with a Border Gateway Protocol (BGP) neighbor in VPNv4 unicast address family. None (VPNv4 Unicast) Indicates that the local BGP does not exchange VPNv4 unicast information with the neighbor. Advertised (VPNv4 Unicast) Indicates that the local BGP advertise its VPNv4 unicast information to the neighbor. Received (VPNv4 Unicast) Indicates that the local BGP receive the VPNv4 unicast information from the neighbor. AS Override Indicates whether the local BGP override the AS number of the peer with its own AS number in the routes received from the peer. Site-of-Origin Indicates the Site-of-Origin value configured to the neighbor. Next Hop Self Indicates whether the local BGP enable the router as the next hop for the neighbor. Remove Private As Indicates whether the configuration of removing the private AS from the AS path attribute in the updates sent to the neighbor is enabled or not. AllowAS In Indicates whether the local BGP allow its own AS number appearing in the received BGP update packets from the neighbor. Num (AllowAS in) Indicates how many times that the local BGP allow its own AS number appearing in the received BGP update packets. This field is only display when the AllowAS In is enabled. Soft Reconfiguration Inbound Indicates whether the local BGP store the route updates received from neighbor. Send Community Indicates whether the local BGP send its community attributes to the neighbor. None (send community) The local BGP doesn't send any community attributes to the neighbor. Standard (send community) The local BGP send standard community attributes to the neighbor. Extended (send community) The local BGP send extended community attributes to the neighbor. Both Standard and Extended The local BGP send both standard and extended community attributes to the neighbor. Default Originate Indicates whether the local BGP send the default route to the neighbor. Route Map (Default Originate) Indicates a route-map name which control in which condition the local BGP send the default route to the neighbor. Incoming Update Prefix List Indicates an IP prefix list name which the route updates received from the neighbor must be applied. Outgoing Update Prefix List Indicates an IP prefix list name which the route updates sent to the neighbor must be applied. Incoming Update Filter List Indicates an AS path access list name which the route updates received from the neighbor must be applied. Outgoing Update Filter List Indicates an AS path access list name which the route updates sent to the neighbor must be applied. 141