D-Link DXS-3600-EM-8T CLI Guide - Page 249

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Parameters filename Specifies the name of file to be deleted (including the path). Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 3 This command does not support the wildcard and the deletion across file systems and across partitions. In additions, if a hard connection or symbol connection is deleted, the contents of the file are not affected. If the file is boot up image or backup image, the operation will be fail. Example DXS-3600-32S#del tmp.txt DXS-3600-32S# This example shows how to delete the tmp.txt file. 20-10 makefs This command is used to format the device that the file system is to be loaded or the device that is to be managed by the file system. makefs dev devname fs fsname makefs fs fsname dev devname Parameters devname fsname Specifies the name of the device to be formatted (including the path). Specifies the name of the file system to be used on the device. Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 3 This command is usually used in the following two cases: A. The device has never used in this file system. In order to normally use the file system on the device, you need to format the device the first time you use it. B. After system has been used for a period of time, if you want to delete all the files on the device, you can use this command to clear all data on the device. Example The FAT is the file system to be used, and the sd0 is the device to be managed by the file system. DXS-3600-32S#makefs dev sd0: fs fat DXS-3600-32S# 20-11 pwd This command is used to show the working path. pwd Parameters Default None. None. 241