D-Link DXS-3600-EM-8T CLI Guide - Page 561

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example DXS-3600-32S#show sntp This example shows how to check the SNTP information. SNTP Status SNTP poll interval : Enabled : 720 sec SNTP Server Status: Stratum Version Last Receive SNTP server 5 1 00:00:12 Synced 10.0.0.2 Total Entries: 1 DXS-3600-32S# Display Parameters SNTP server Stratum Version Last Receive Synced Description IP Address of the configured NTP server. NTP stratum of the server. The stratum indicates how far away from an authoritative time source the server is. NTP version of the server. Time since the last NTP packet was received from the server. Indicates the server chosen for synchronization. 56-5 clock set This command is used to manually set the system clock. clock set HH:MM:SS DDMMMYYYY Parameters HH:MM:SS DDMMMYYYY Specifies the current time, in the format of Hour (24-hour): Minute: Second Specifies the current date. DD - Current day (1-31) in the month. MMM - Current month (jan, feb, mar, apr, may, jun, jul, aug, sep, oct, nov, dec). YYYY - Current year (2000-2100). Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 8 Use this command to set the system time to facilitate the management. For devices without hardware clock, the time set by the clock set command takes effect for only the current setting. Once the device powers off, the manually set time becomes invalid. The time specified in this command is relative to the configured time zone. You can verify your settings by entering the show clock command. Example This example shows how to manually sets the software clock to 1:32 p.m. on December 23, 2011. DXS-3600-32S#clock set 13:32:00 23dec2011 DXS-3600-32S# 553