D-Link DXS-3600-EM-8T CLI Guide - Page 569

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 57-8 instance This command is used to map a VLAN or a set of VLANs to an MST instance. To return the VLANs to the default instance (CIST), use the no instance INSTANCE-ID vlans VLANDID [,|.] command. Use the no instance INSTANCEID command to delete an MST instance. instance INSTANCE-ID vlans VLANDID [,|.] no instance INSTANCE-ID [vlans VLANDID [,|.]] Parameters INSTANCE-ID vlans VLANDID [,|.] Specifies the MSTP Instance identifier to which the specified VLANs are mapped. The instance 0 represents for default instance, CIST. Specifies the number of the VLANs to be mapped to the specified instance. Valid values are from 1 to 4094. Default Command Mode Command Default Level Usage Guideline All VLANs are mapped to the CIST instance in default. MST Configuration Mode. Level: 8 This command is used to map VLANs to the MST instance. When mapping VLAN(s) to a MST instance, if this instance is not exist, this instance will be created automatically. User can use no instance INSTANCE-ID command to delete a MST instance manually. Example This example shows how to map a range of VLANs to instance 2. DXS-3600-32S#configure terminal DXS-3600-32S(config)#spanning-tree mst configure Success DXS-3600-32S(config-mst)#instance 2 vlans 1-100 Success DXS-3600-32S(config-mst)# 57-9 name This command is used to set the name of an MST region. To return to the default name, use the no form of this command. name NAME no name Parameters NAME Specifies the name given for a specified MST region. The name string has a maximum length of 32 characters. Default Command Mode Command Default Level The default value for name is the Bridge MAC Address. MST Configuration Mode. Level: 8 561