D-Link DXS-3600-EM-8T CLI Guide - Page 200

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 12-3 copy error-log This command is used to copy error log information to a location filename through TFTP. copy error-log tftp [//location/filename] Parameters tftp location filename Specifies to upload the error log through a TFTP server. Specifies the location of the TFTP server. Specifies the location filename of the upload error log. Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 15 The user can use the copy error-log command to copy the error log information through TFTP to a location file. Example This example shows how to copy error log information through a TFTP to a file name 'err-log.txt' at 10.0.0.90 DXS-3600-32S#configure terminal DXS-3600-32S(config)#copy error-log tftp //10.0.0.90/error-log.txt DXS-3600-32S(config)# 12-4 copy debug buffer This command is used to copy debug buffer information to a location filename through a TFTP. copy debug buffer tftp [//location/filename] Parameters tftp location filename Specifies to upload the debug buffer information through a TFTP server. Specifies the location of the TFTP server. Specifies the location filename of the debug buffer information. Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 15 The user can use the copy debug buffer command to copy the debug buffer information through TFTP to a location file. Example This example shows how to copy debug buffer information through TFTP to a file name "debug.txt" to 10.0.0.90 DXS-3600-32S#configure terminal DXS-3600-32S(config)#copy debug buffer tftp //10.0.0.90/debug.txt DXS-3600-32S(config)# 192