Dell 1355 Color Laser User's Guide - Page 355

Line Monitor Off Turns off the volume of the line monitor. Low Medium* High Specifies the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a connection is made. Ring Tone Volume Off Low Medium High* Turns off the volume of the ring tone. Specifies the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker when Receive Mode is set to Telephone/Fax. Line Type PSTN* Sets the line type to PSTN. PBX Sets the line type to PBX. Tone/Pulse Tone* Sets the dialing type to Tone. Pulse(10PPS Sets the dialing type to Pulse (10 pulse per second). ) Pulse(20PPS Sets the dialing type to Pulse (20 pulse per second). ) Resend Delay 8* Specifies the interval between transmission attempts. 3-255 Redial 3* Attempts 0-9 Specifies the number of redial attempts to make when the destination fax number is busy. If you enter 0, the printer will not redial. Redial Delay 1* Specifies the interval between redial attempts. 1-15 Junk Fax Setup Off* On Does not reject faxes sent from unwanted numbers. Rejects faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered in the Phone Book. Remote Receive Off* On Disables the remote receive feature. Receives a fax by pressing a remote receive code on the external telephone after picking up the handset of the telephone. Remote Rcv 00* Tone 00-99 Specifies the remote receive code in two digits to start Remote Receive. Understanding the Tool Box Menus 353