Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 230
Get Information from Printer, Printer Configuration Web Tool
View all Dell 3115cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
IP Mode*1 Dual Stack Uses both IPv4 and IPv6 to set the IP address. IPv4 Mode Uses IPv4 to set the IP address. IPv6 Mode*3 Uses IPv6 to set the IP address. IPv4 Get IP Address AutoIP* Automatically sets the IP address. BOOTP Uses BOOTP to set the IP address. RARP Uses RARP to set the IP address. DHCP Uses DHCP to set the IP address. Panel Enables the IP address entered on the operator panel. IP Address Sets the IP address allocated to the printer by using the keys on the operator panel. Subnet Mask Sets the subnet mask. Gateway Address Sets the gateway address. Reset IPsec*2 Disables IPsec. *1 Only displayed when an optional multi-protocol card is installed on the printer. *2 Only displayed when IPsec is enabled. *3 This mode is available only when firmware version 200706291103 or later and network (MPC) firmware version 16.03 or later are installed. Since you cannot set IPsec in Windows Vista in this mode, use the Dell Printer Configuration Web Tool. The Get Information from Printer function on the Options tab of the printer driver is not available when using this mode. Protocol Purpose: To enable or disable each item. The change becomes effective after the printer is turned off and then on again. Values: