Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 504

1. Press until >SETUP appears, and then press . 2. Press until >Admin Menu appears, and then press . 3. Press until >Maintenance appears, and then press . 4. Press until >Color Reg Adjust appears, and then press . 5. Press until >Enter Number appears, and then press . The cursor is located at the first digit of the Enter Number. 6. Press or until you reach the value (for example, +3) displayed on the chart. 7. Press once and move the cursor to the next value. 8. Repeat steps 6 and 7 to enter all of the digits of the Enter Number, and then press . 9. Press until >ColorRegi Chart appears, and then press . The color registration chart is printed with the new values. 10. Color registration adjustment is complete when the straightest Y (Yellow), M (Magenta), and C (Cyan) lines are next to the 0 line. CAUTION: After printing the color registration chart, do not turn off the multifunction printer until the printer motor has stopped running. NOTE: If 0 is not next to the straightest lines, determine the values and adjust the multifunction printer again. Cleaning the scanner Keeping the scanner clean helps ensure the best possible copies. Dell recommends cleaning the scanner at the start of each day and during the day, as needed. 1. Slightly dampen a soft lint-free cloth or paper towel with water. 2. Open the document cover.