Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 241

Purpose: To specify the number of redial attempts, 0-9. If you enter 0, the multifunction printer will not redial. Int. of Redial Purpose: To automatically redial a remote fax machine if it was busy. Intervals from 1-15 minutes can be entered. Ans Select Purpose: To select the default fax receiving mode. Values: TEL Mode Automatic fax reception is turned off. You can receive a fax by picking up the handset of the external phone and then pressing the remote receive code, or by setting OnHook to On (you can hear voice or fax tones from the remote machine) and then pressing Start. FAX Mode* A fax is automatically received. TEL/FAX Mode When the multifunction printer receive an incoming a fax, the external telephone rings for the time specified in Auto Ans. TEL/FAX, and then the multifunction printer automatically receive a fax. If incoming data is not a fax, the multifunction printer beeps from the internal speaker. Ans/FAX Mode The multifunction printer can share one telephone line with an answering machine. In this mode, the multifunction printer will monitor the fax signal and pick up the line if there are fax tones. If the phone communication in your country is serial, this mode is not available. DRPD Mode Before using the Distinctive Ring Pattern Detection (DRPD) option, distinctive ring service must be installed on your telephone line by the telephone company. After the telephone company has provided a separate number for faxing with a distinctive ring pattern, configure the fax setup to monitor for that specific ring pattern. Auto Answer Fax Purpose: To answer an incoming call and automatically go into the receive mode. You can specify the time for incoming call of the external phone in 0-255 seconds.