Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 233

IP Filter (IPv4) Purpose: To specify that data received from certain IP addresses through the wired network is blocked. You can set up to five IP addresses. The change becomes effective after the printer is turned off and then on again. Values: Filter*1 No. n/Address (n is 1-5.) Sets the IP address for Filter n. No. n/Mask (n is 1-5.) Sets the mask for Filter n. Disable the IP Filter feature for Filter n. No. n/Mode (n is 1-5.) Off* Accepts an access from specified IP address. Accept Rejects an access from specified IP address. Reject *1 This item is only available for LPD or Port9100. Initialize NVM Purpose: To initialize wired network data stored in NVM. After executing this function and rebooting the printer, all wired network settings are reset to their default values. Adobe Protocol Purpose: To specify PostScript communication protocol for each interface. You can configure the Adobe Protocol settings for the wired network. The change becomes effective after the printer is turned off and then on again. Values: