Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 239

Purpose: To specify PostScript communication protocol for each interface. You can configure Adobe Protocol settings for the wireless network. The change becomes effective after the multifunction printer is turned off and then on again. Values: Auto Used when auto-detecting the PostScript communication protocol. Used when the communication protocol is in ASCII interface. Standard BCP Used when the communication protocol is in binary format. TBCP* Used when the communication protocol supports both ASCII and binary data to switch between them according to the specified control code. Binary Used when no special processing is required. Parallel Settings The Parallel Settings menu can be adjusted to configure the parallel interface. NOTE: Values marked by an asterisk (*) are the factory default menu settings. ECP Purpose: To specify the ECP communication mode of the parallel interface. The change becomes effective after the multifunction printer is turned off and then on again. Values: The ECP communication mode is enabled. Enable* The ECP communication mode is disabled. Disable