Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 238

Auto* Automatically sets the frame type. Ethernet II Uses the Ethernet II frame type. Uses the IEEE802.3 frame type. Ethernet 802.3 Uses the IEEE802.2 frame type. Ethernet 802.2 Use the SNAP frame type. Ethernet SNAP IP Filter (IPv4) Purpose: To specify that data received from certain IP addresses through the wireless network is blocked. You can set up to five IP addresses. The change becomes effective after the multifunction printer is turned off and then on again. Values: IP Filter*1 No. n/Address (n is 1-5.) Sets the IP address for Filter n. No. n/Mask (n is 1-5.) Sets the mask for Filter n. Disable the IP Filter feature for Filter n. No. n/Mode (n is 1-5.) Off* Accepts an access from specified IP address. Accept Rejects an access from specified IP address. Reject *1 This item is only available for LPD or Port9100. Initialize NVM Purpose: To initialize wireless network data stored in NVRAM. Adobe Protocol