Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 326

Auto Ans. Ans/FAX The multifunction printer can share one telephone line with an answering machine. In this mode, the multifunction printer will monitor the fax signal and pick up the line if there are fax tones. If the phone communication in your country is serial, this mode is not available. Line Monitor You can specify the volume of the internal speaker. Ring Tone You can specify the volume for the incoming faxes. Volume Line Type You can select the default line type. · PSTN · PBX Dialing Type You can select the dialing type. · PB · DP (10PPS) · DP (20PPS) DM Prevention Using the DM Prevention feature, the system only accepts faxes from the remote stations registered in the speed dial. This feature is useful for blocking any unwanted faxes. Select Off to turn the feature off. Anybody can send you a fax. Select On to turn the feature on. Remote Receive You can receive a fax by pressing the remote receive code on the external telephone after picking up the handset of the telephone. Remote Rcv You can specify the tone when Remote Receive is set to On . Tone Duplex Print You can use duplex printing when you receive a fax. This option is available only when the optional duplexer is installed on your multifunction printer. Send Header Prints the sender record at the head of the fax. Select Off to turn this feature off. Select On to turn this feature on. Send Header Name Specifies the sender name in the sender report. G3ID Contains your telephone number, which is printed at the top of each page sent from your multifunction printer. This feature is available when you set Send Header to On . Local Name Contains your name or company name, which is printed on the report sheet. DRPD Pattern Before using the Distinctive Ring Pattern Detection (DRPD) option, distinctive ring service must be installed on your telephone line by the telephone company. After the telephone company has provided a separate number for faxing with a distinctive ring pattern, configure the fax setup to monitor for that specific ring pattern. Forward Settings You can set your multifunction printer to forward incoming faxes to another fax number during a specified time period. When a fax arrives at your multifunction printer, it is stored in the memory. Then, the multifunction printer dials the fax number that you have specified and sends the fax. Select Trans. at Error to forward the incoming faxes when an error occurs.