Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 249
Power Saver Timer, Auto Reset, Enable, Disable, Purpose, Values, Mode1, 6 min
View all Dell 3115cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Enable* Enables Power Saver Mode2. Disable Disables Power Saver Mode2. Power Saver Timer Purpose: To specify the amount of time the multifunction printer waits after a job is submitted before it goes into the power saver mode. Values: Mode1 5-60 min Specifies the amount of time before the multifunction printer enters power saver mode after it finishes a job. 5 min* Mode2 1-6 min 6 min* Enter 5 to put the multifunction printer in power saver mode five minutes after it finishes a job. This uses much less energy, but requires more warm-up time for the multifunction printer. Enter 5 if your multifunction printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your multifunction printer is in constant use. Under most circumstances, this keeps the multifunction printer ready to operate with minimum warm-up time. Select a value between 5 and 60 minutes for power save mode if you want a balance between energy consumption and a shorter warm-up period. The multifunction printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax machine. You can also return the multifunction printer to the standby mode by pressing any button on the operator panel. Auto Reset Purpose: To automatically reset the settings for COPY, SCAN, or FAX to the default and return to the standby mode after you do not specify any settings for the specified time.