Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 235
Purpose, Values, IP Mode, Dual Stack, Get IP Address, AutoIP, BOOTP, Panel, Subnet Mask
View all Dell 3115cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
Purpose: To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values. TCP/IP Purpose: To specify the TCP/IP settings for the wireless network. The change becomes effective after the printer is turned off and then on again. Values: IP Mode*1 Dual Stack Uses both IPv4 and IPv6 to set the IP address. IPv4 Mode Uses IPv4 to set the IP address. IPv6 Mode*3 Uses IPv6 to set the IP address. IPv4 Get IP Address AutoIP* Automatically sets the IP address. BOOTP Uses BOOTP to set the IP address. RARP Uses RARP to set the IP address. DHCP Uses DHCP to set the IP address. Panel Enables the IP address entered on the operator panel. IP Address Sets the IP address allocated to the printer by using the keys on the operator panel. Subnet Mask Sets the subnet mask. Gateway Address Sets the gateway address. Reset IPsec*2 Disables IPsec. *1 Only displayed when an optional multi-protocol card is installed on the printer. *2 Only displayed when IPsec is enabled.