Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 327

Select Trans. Always to always forward the incoming faxes. Select Not Trans. not to forward incoming faxes. You can set the fax number to which faxes are forwarded. Then, you can enter the start time and/or the end time. The Print Local Copy option allows you to set the multifunction printer to print the fax, if fax forwarding is completed with no error. Fwd. Settings Num You can set the number of the multifunction printer to always forward all of the incoming faxes to the specified destination. Fwd. Set Print Prints all of the ongoing faxes when you can set the multifunction printer to always forward the faxes to the specified destination. Prefix Dial You can select whether or not to add the prefix number when you send a fax. Prefix Dial You can set a prefix dial number up to five digits. This number dials before any auto dial Num number is started. It is useful for accessing the PABX exchange. Discard Size When receiving a document as long as or longer than the paper installed in your multifunction printer, you can set the multifunction printer to discard any excess at the bottom of the page. If the received page is outside the margin you set, it will print on two sheets of paper at the actual size. When the document is within the margin and the Auto Reduction feature is turned on, the multifunction printer reduces the document to fit it onto the appropriate sized paper and discard does not occur. If the Auto Reduction feature is turned off or fails, the data within the margin will be discarded. Color Fax Set whether the multifunction printer sends and receives color faxes. Extel Hook You can set the threshold value for the OnHook mode. Thresh Country You can select the country where the multifunction printer is used. Fwd. Error Prints the document failed to transfer when Forward Set Print is set to Off . Print NOTE: Prefix Dial only supports the environment where you send a fax to send a fax to the external line number. To use Prefix Dial, you must do the following from the operator panel. 1. Use and press . to select SETUP Admin Menu Fax Settings Line Type . Select PBX , and then 2. Use and press . to select SETUP Admin Menu Fax Settings Prefix Dial . Select On , and then 3. Use and to select SETUP Admin Menu Fax Settings Prefix Dial Num . Enter a maximum of five-digit prefix number from 0-9, *, and #. Advanced Fax Settings NOTE: The advanced fax settings are only meant for advanced users. Incorrect settings on the Dell 3115cn may damage the device.