Dell 5310n Mono Laser Printer User's Guide - Page 63
Security, Network/Ports
View all Dell 5310n Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Security This menu selection is used to set security levels on individual print jobs requiring a PIN. Menu selection: Job Expiration Purpose: Limits the amount of time a confidential job stays in the printer before it is deleted. Values: Off* 1 hour 4 hours 24 hours 1 week Network/Ports TCP/IP This menu section is use to view and change the Transmission Control Protocol/Internet Protocol settings. NOTE: This menu is not displayed for non-network models. Menu selection: TCP/IP Purpose: Sets the network option to TCP/IP (Transmission Control Protocol/Internet Protocol) Standard Network and Network Values: Activate View Hostname Address Netmask Gateway Enable DHCP Enable RARP Enable BOOTP AutoIP Enable FTP/TFTP HTTP Server Enabled WINS Server Address DNS Server Address On* Off View only 4 field IP address On* Off 4 field IP address Use this menu selection to change printer settings affecting jobs sent to the printer through a network port (either Standard Network or Network ). Menu selection: Purpose: PCL SmartSwitch Configures the printer so it automatically switches to PCL emulation when a print job received through the network port requires it, regardless of the default printer language. Values: On* Off PS SmartSwitch Configures the printer so it automatically switches to PostScript emulation when a print job received through the network port requires it, regardless of the default printer language. On* Off NPA Mode Network Buffer Specifies whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol. Off Auto* NOTE: Changing this menu item automatically resets the printer. Configures the size of the network input buffer. Auto* Printer examines data on the network interface and selects PCL emulation if the data indicates that is the required printer language. Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off. Printer examines data on the network interface connection and selects PostScript emulation if the data indicates that is the required printer language. Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off. Printer does not perform NPA processing. Printer examines the data to determine the format and then processes it appropriately. Printer automatically calculates the Network Buffer size (recommended setting).