Dell 5310n Mono Laser Printer User's Guide - Page 72
All settings in the Parallel Menu, Network Menu, Infrared Menu, LocalTalk Menu, and USB
View all Dell 5310n Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Reattach bins - l Turn the printer off and back on. ¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the specified bins, then reattach the bin to the printer, r, and then restart the printer. ¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the specified bin, and call for service. l Press the Select button to clear the message and print without using the specified bins. Reattach envelope feeder l Turn the printer off and back on. ¡ If the error recurs, turn the printer off, remove the envelope feeder, then reattach the envelope feeder to the printer. ¡ If the error recurs, turn the printer off, remove the envelope feeder, and call for service. l Press the Select button to clear the message and print without using the envelope feeder. Remote Management Active DO NOT POWER OFF The printer settings are being configured, and the printer was taken offline to ensure it is not currently printing and processing jobs. Remove paper from bin Remove paper from all bins Remove paper from Wait for the message to clear. Remove the stack of paper from the specified bin(s). Remove the paper from all output bins. The printer automatically senses media removal and resumes printing. If removing the media does not clear the message, Press the Select button . Remove paper from standard output bin Resetting Active Bin Resetting the Printer Restoring Factory Defaults Remove the paper from the standard bin. Wait for the message to clear. Wait for the message to clear. Wait for the message to clear. NOTE: When factory default settings are restored: l All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted. l All menu settings return to the factory default setting except: ¡ The Display Language setting in the "Setup" Menu. ¡ All settings in the "Parallel" Menu, "Network" Menu, "Infrared" Menu, "LocalTalk" Menu, and "USB" Menu. Restoring held job(s) x/y Some held jobs were lost Standard Bin Full Submitting selection Toner Low Tray Empty Tray Low Tray Missing USB USB View supplies Waiting l Wait for the message to clear. l Select Quit restoring to delete unrestored Print and Hold jobs. NOTE: x represents the number of the job being restored, and y represents the total number of jobs to be restored. l Press the Select button to clear the message and continue printing. The printer frees memory by deleting the oldest held job and continues deleting held jobs until there is enough printer memory to process the job. l Cancel the current job. Remove the stack of paper from the bin to clear the message. Wait for the message to clear. l Replace the toner cartridge. l Press Select to clear the message and continue printing. Load paper in the tray to clear the message. Add paper to the tray to clear the message. Insert the tray into the printer. The printer is processing data through the specified USB port. Displays the current level of all printer supplies. The printer has received a page of data to print, but is waiting for an End of Job command, a Form Feed command, or additional data. l Press the Select button l Cancel the current job. to print the contents of the buffer.