Dell 5310n Mono Laser Printer User's Guide - Page 89

Installing and Removing Options Order of Installation Installing a 250-Sheet or 500-Sheet Drawer Installing a Duplex Unit Installing an Output Expander Installing an Envelope Feeder Installing Printer Memory Installing Font ROMs Order of Installation Floor-mounted configurations require additional furniture. You must use either a printer stand or printer base if you are using more than one input option or a duplex unit and an input option. NOTE: Furniture options may not be available in all regions. Contact your Dell Sales Representative to determine furniture availability. CAUTION: If you are installing options after setting up the printer, turn the printer off, and unplug the power cord before continuing. Install the printer and any options you have purchased in the following order: l Printer stand or printer base l 250-sheet or 500-sheet drawer l Duplex unit l Printer NOTE: You can install up to four optional paper trays, or three trays and a duplex unit. CAUTION: The printer requires two people to lift it safely. CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using more than one input option or a duplex unit and an input option. For information on installing a printer stand or printer base, see the instructions included with the option. Installing a 250-Sheet or 500-Sheet Drawer NOTE: You can install up to four optional paper trays, or three trays and a duplex unit. Optional drawers attach under the printer and optional duplex unit. A drawer consists of a tray and a support unit. The 250-sheet drawer and the 500-sheet drawer are installed the same way. 1. Remove the tray from the support unit. Remove all packing material and tape from both the support unit and the tray.