Dell OptiPlex 755 User's Guide - Page 109
Removing a PCI Card, If necessary, disconnect any cables connected to the card. - pci driver
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
b Connect the network cable to the connector on the network adapter card. Do not connect the network cable to the integrated network connector on the back panel of the computer. 14 Install any drivers required for the card as described in the card documentation. Removing a PCI Card 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 90). 3 Gently rotate upward the release tab on the card-retention latch. 1 5 2 3 4 1 card 2 card-retention latch 3 system board connector 4 card insert 5 release tab 4 If necessary, disconnect any cables connected to the card. 5 If you are replacing a PCI Express x16 card, remove the installed card by gently pulling the release lever away from the card until you release the securing tab from the dent in the card. Expansion Cards 109