Dell OptiPlex 755 User's Guide - Page 192
latch until it snaps into the open position.
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
1 2 3 4 5 1 release tab 2 4 serial port adapter connector 5 adapter retention latch serial port adapter system board connector (PS2/SERIAL2) 3 serial port adapter bracket 8 Connect the adapter cable to the PS/2 serial port adapter connector (PS2/SERIAL2) on the system board (see "System Board Components" on page 172). NOTE: See the documentation for the PS/2 serial port adapter for information about the cable connections. 9 Replace the computer cover (see "Replacing the Computer Cover" on page 317. Removing a PS/2 Serial Port Adapter 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 168). 3 Gently lift the release tab on the card retention latch from the inside to pivot the latch open. Pivot the latch until it snaps into the open position. 4 Disconnect the PS/2 serial-port cable from the system board (see "System Board Components" on page 172). 192 Expansion Cards