Dell OptiPlex 755 User's Guide - Page 149
Removing the Processor
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Processor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis. Removing the Processor 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 90). 3 Remove the heat sink assembly (see "Removing the Heat Sink Assembly" on page 94). NOTICE: Unless a new heat sink is required for the new processor, reuse the original heat sink assembly when you replace the processor. 4 Open the processor cover by sliding the release lever from under the center cover latch on the socket. Then pull the lever back to release the processor. 2 3 4 1 5 1 center cover latch 4 socket 2 processor cover 5 release lever 3 processor Processor 149