Dell OptiPlex 755 User's Guide - Page 72
Drive, SATA-1, or SATA-3 under - cooling fan
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
7 Connect the power and data cables to the drive and to the system board. NOTICE: Always connect the optical drive SATA cable to a system board SATA connector that is labeled with a number higher than those connected to any hard drives installed in the computer. 1 2 3 1 power cable 2 data cable 3 SATA optical drive connector 8 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 9 Replace the computer cover (see "Replacing the Computer Cover" on page 317). 10 Update your configuration information in system setup by setting the appropriate Drive option (SATA-1, SATA-2, or SATA-3) under Drives. See "System Setup" on page 280. 11 Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 353). 72 Drives