Dell OptiPlex 755 User's Guide - Page 74
Installing the Processor, Then, pull the lever back to release the processor.
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
NOTICE: Unless a new heat sink is required for the new processor, reuse the original heat sink assembly when you replace the processor. 5 Open the processor cover by sliding the release lever from under the center cover latch on the socket. Then, pull the lever back to release the processor. NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket. 2 3 4 1 5 1 center cover latch 4 socket 2 processor cover 5 release lever 3 processor 6 Gently remove the processor from the socket. Leave the release lever extended in the release position so that the socket is ready for the new processor. Installing the Processor NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer. NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket. 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 27). 74 Processor