Dell OptiPlex 755 User's Guide - Page 204
Removing an Optical Drive
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Optical Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover. Removing an Optical Drive 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 168). 3 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the cable connectors. 4 Pull up on the drive release latch and slide the drive towards the back of the computer. Then lift up to remove the drive from the computer. 2 1 1 drive release latch 2 optical drive 5 Disconnect the power and data cable from the back of the drive. NOTE: The power and data cables for the slimline optical drive installed in your computer are configured in one of two ways as illustrated below. 204 Drives