Dell OptiPlex 755 User's Guide - Page 114
Removing a PCI Card From the Riser-Card Cage, Remove the riser-card cage
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
15 If you installed a network adapter card and want to turn off the integrated network adapter: a Enter system setup, select Network Controller and change the setting to Off (see "Entering System Setup" on page 280). b Connect the network cable to the network adapter card's connectors. Do not connect the network cable to the integrated network connector on the back panel of the computer. NOTICE: If you disable the integrated network adapter, you will not have AMT functionality. 16 Install any drivers required for the card as described in the card documentation. Removing a PCI Card From the Riser-Card Cage 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 90). 3 Remove the riser-card cage: a Check any cables connected to cards through the back panel openings. Disconnect any cables that will not reach the riser-card cage once they are removed from the computer. b Gently pull on the handle and lift the riser-card cage up and away from the computer. 1 2 1 riser-card cage 2 handle 4 Press in on the tab to raise the card-retention latch. 114 Expansion Cards