Dell OptiPlex 755 User's Guide - Page 48
card fully seated
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4 Remove the filler bracket (if applicable). NOTE: See the documentation that came with the PS/2 serial port adapter for information on configuring the adapter, making internal connections, or customizing it for your computer. 5 Align the PS/2 serial-port adapter bracket in the retention slot and press down firmly. Ensure that the adapter is fully seated in the slot. 2 1 3 4 1 card fully seated 3 bracket within slot 2 card not fully seated 4 bracket caught outside of slot Before you close the card retention mechanism, ensure that: • The tops of all adapters and filler brackets are flush with the alignment bar. • The notch in the top of the adapter or filler bracket fits around the alignment guide. 6 Close the card retention latch and gently press until it snaps into place. NOTICE: Do not route cables over any installed cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 7 Connect the adapter cable to the serial port adapter connector (SERIAL2) on the system board (see "System Board Components" on page 32 for connector locations). 48 Cards