Dell OptiPlex 755 User's Guide - Page 138
Removing a Media Card Reader
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover. NOTE: If you will be operating your computer without an optical drive or a 3.5-inch drive installed, the appropriate drive bay insert must be installed in place of the drive. Contact Dell if you need a drive bay insert. Removing a Media Card Reader 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 90). NOTE: Since the following steps do not require the complete removal of the optical drive, it is not necessary to disconnect the cables connecting the optical drive. 3 Remove the optical drive (if one exists) and carefully set it aside (see "Removing an Optical Drive" on page 131). NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the cable connectors. 4 Pull up on the drive-release latch and slide the media card reader to the back of the computer. Then, lift up to remove the drive from the computer. 1 2 138 Drives 1 drive release latch 2 media card reader