Dell OptiPlex 755 User's Guide - Page 190
Uninstall the card's driver. See the documentation that came with the card for instructions.
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
7 While pressing the lever, pull the removal pull tab up and remove the card out of the card connector. 1 5 4 7 6 1 PCI Express x16 DVI-card 4 lever 7 PCI Express x16 card connector 2 removal pull tab 5 securing slot 3 DVI card connector 6 securing tab 8 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets keep dust and dirt out of your computer and maintain the airflow that cools your computer. 9 Before you close the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 10 Secure any remaining card(s) by closing the card retention latch and snapping it into place. NOTICE: Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 11 Replace the computer cover (see "Replacing the Computer Cover" on page 317). 12 Uninstall the card's driver. See the documentation that came with the card for instructions. 190 Expansion Cards