Dell OptiPlex 755 User's Guide - Page 64
Diskette Drive, Removing the Floppy Drive
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Removing the Floppy Drive 1 Boot your computer and enter system setup (see "Entering System Setup" on page 280). Use the Diskette Drive option to disable the floppy drive. 2 Follow the procedures in "Before You Begin" on page 21. 3 Remove the computer cover (see "Removing the Computer Cover" on page 27). 4 Remove the drive panel by sliding the drive release latch downward to open the panel, and then remove it from the hinges. 5 Disconnect the power and data cables from the back of the floppy drive. 2 1 1 floppy drive 2 drive release latch 6 Grasp the sliding plate lever and slide it towards the bottom of the computer until the drive panel snaps open; while holding the lever in place, slide the drive out of the computer. Installing the Floppy Drive 1 If you are replacing a floppy drive, remove the shoulder screws from the existing drive and attach the screws to the replacement drive. 2 If you are installing a new floppy drive, remove the drive-panel insert for the 3.5-inch drive bay, remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive. 64 Drives