Dell OptiPlex 755 User's Guide - Page 131
Replacing Drive Inserts, Removing an Optical Drive
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Replacing Drive Inserts If you are removing a drive, and need to replace the inserts: 1 Place the plastic insert over the opening and press the insert tab down until the plastic insert snaps into place. 2 Slide the metal bracket toward the front of the computer and click into place. 3 Replace the computer cover (see "Replacing the Computer Cover" on page 317). Optical Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover. NOTE: If you will be operating your computer without an optical drive or a 3.5-inch device (floppy drive or media card reader) installed, the appropriate drive bay insert must be installed in place of the drive. Contact Dell if you need a drive bay insert. See "Removing Drive Inserts" on page 129. Removing an Optical Drive 1 Follow the procedures in "Before You Begin" on page 21. 2 Remove the computer cover (see "Removing the Computer Cover" on page 90). NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the cable connectors. 3 Pull up on the drive-release latch and slide the drive towards the back of the computer. Then, lift up to remove the drive from the computer. Drives 131