Dell PowerConnect 7048P User Manual - Page 1017

Command Purpose redistribute ospf [metric Configure RIP to allow redistribution of routes from the metric] [match [internal] OSPF. [external 1] [external 2] [nssa-external 1] [nssaexternal 2]] • ospf- Specifies OSPF as the source protocol. • metric - Specifies the metric to use when redistributing the route. Range: 1-15. • internal - Adds internal matches to any match types presently being redistributed. • external 1 - Adds routes imported into OSPF as Type1 external routes into any match types presently being redistributed. • external 2 - Adds routes imported into OSPF as Type2 external routes into any match types presently being redistributed. • nssa-external 1 - Adds routes imported into OSPF as NSSA Type-1 external routes into any match types presently being redistributed. • nssa-external 2 - Adds routes imported into OSPF as NSSA Type-2 external routes into any match types presently being redistributed. distance rip integer Set the route preference value of RIP in the router. Lower route preference values are preferred when determining the best route. exit Exit to Global Config mode. exit Exit to Privileged Exec mode. show ip rip View information about the RIP route distribution configuration. Configuring RIP 1017