Dell PowerConnect 7048P User Manual - Page 304

Command Purpose clock summer-time Use this command if the summer time does not start and date {date month | end every year according to a recurring pattern. You can month date} year enter the month and then the date, or the date and then the hh:mm {date month | month. month date} year • date- Day of the month. (Range: 1-31.) hh:mm [offset offset] [zone acronym] • month - Month. (Range: The first three letters by name) • hh:mm - Time in 24-hour format in hours and minutes. (Range: hh: 0-23, mm: 0-59) • offset - Number of minutes to add during the summertime. (Range:1-1440) • acronym - The acronym for the time zone to be displayed when summertime is in effect. (Range: Up to four characters) CTRL + Z Exit to Privileged EXEC mode. show clock [detail] View information about the time. Include the detail keyword to view information about the time zone and summer time. Configuring the Expansion Slots Beginning in Privileged EXEC mode, use the following commands to configure and view information about the expansion slots and plug-in modules (cards). Command Purpose configure Enter Global Configuration mode. slot unit/slot cardindex Configured the specified slot (1-2) to use the plug-in module identified by the cardindex number (CID). To view the CID associated with each plug-in module, use the show supported cardtype command. CTRL + Z Exit to Privileged EXEC mode. show slot Display status information about the expansion slots. show supported cardtype Display information about the plug-in modules the switch supports. 304 Managing General System Settings