Dell PowerConnect 7048P User Manual - Page 218

Command Purpose passwords lock-out attempts Specify the number of times a user can enter an incorrect password before being denied access to the management interface. NOTE: Password lockout applies only to local users. Users authenticated by RADIUS and TACACS+ are subject to the policies defined by the RADIUS or TACACS+ server. When a lockout count is configured, a user who is logging in must enter the correct password within that count. Otherwise that user will be locked out from further switch access. Only an administrator with an access level of 15 can reactivate that user (Range 1-5). passwords strength minimum numericcharacters min Enforce a minimum number of numeric numbers that a password should contain. The valid range is 0-16. passwords strength minimum specialcharacters min Enforce a minimum number of special characters that a password should contain. The valid range is 0-16. passwords strength maximum consecutivecharacters min Enforce a maximum number of consecutive characters that a password can contain. For example, abcd is four consecutive characters. If the password has more consecutive characters than the limit, it fails to configure. The valid range is 0-16. passwords strength maximum repeated characters min Enforce a maximum repeated characters that a password should contain. If password has repetition of characters more than the configured max-limit, it fails to configure. The valid range is 0-16. passwords strength minimum characterclasses min Enforce a minimum number of characters classes that a password should contain. Character classes include: • Uppercase letters • Lowercase letters • Numeric characters • Special characters. The valid range is 0-4. 218 Controlling Management Access