Dell PowerConnect 7048P User Manual - Page 303

Setting the System Time and Date Manually Beginning in Privileged EXEC mode, use the following commands to configure the time and date, time zone, and summer time settings. Command Purpose clock set {mm/dd/yyyy Configure the time and date. You can enter the time first hh:mm:ss} | and then the date, or the date and then the time. {hh:mm:ss mm/dd/yyyy • hh:mm:ss -Time in hours (24-hour format, from 01-24), minutes (00-59), and seconds (00-59). • mm/dd/yyyy - Two digit month (1-12), two-digit date of the month (01-31), and four-digit year. clock timezone hours- Configure the time zone settings. offset hours-offset • hours-offset - Hours difference from UTC. (Range: -12 to [minutes minutesoffset] [zone acronym] +13) • minutes-offset - Minutes difference from UTC. (Range: 0-59) • acronym - The acronym for the time zone. (Range: Up to four characters) clock summer-time recurring {usa | eu | {week day month hh:mm week day month hh:mm}} [offset offset] [zone acronym] Use this command if the summer time starts and ends every year based on a set pattern. For switches located in the United States or European Union, use the usa or eu keywords to use the preconfigured values. Otherwise, configure the start and end times by using the following values: • week - Week of the month. (Range: 1-5, first, last) • day - Day of the week. (The first three letters by name) • month - Month. (The first three letters by name; jan, for example.) • hh:mm - Time in 24-hour format in hours and minutes. (Range: hh: 0-23, mm: 0-59) • offset - Number of minutes to add during the summertime. (Range:1-1440) • acronym - The acronym for the time zone to be displayed when summertime is in effect. (Up to four characters) Managing General System Settings 303