Dell PowerConnect 7048P User Manual - Page 986

Command Purpose area area-id nssa [no- Create and configure an NSSA for the specified area ID. redistribution] [default- • metric-value-Specifies the metric of the default route information-originate advertised to the NSSA. (Range: 1-16777214) [metric metric-value] [metric-type metric-type- • metric-type-value-The metric type can be one of the value]] [no-summary] following : [translator-role role] • A metric type of nssa-external 1 (comparable) [translator-stab-intv interval] • A metric type of nssa-external 2 (non-comparable) • no-summary-Summary LSAs are not advertised into the NSSA • role-The translator role where role is one of the following : • always-The router assumes the role of the translator when it becomes a border router. • candidate-The router to participate in the translator election process when it attains border router status. • interval-The period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. (Range: 0-3600) area area-id nssa no-redistribution Prevent learned external routes from being redistributed to the NSSA. exit Exit to Global Config mode. exit Exit to Privileged EXEC mode. show ipv6 ospf area area- Show configuration and status of an OSPF area. id 986 Configuring OSPF and OSPFv3