Dell PowerConnect 7048P User Manual - Page 178

What Other Features Use Authentication? In addition to controlling access to the management interface, the switch can use RADIUS, IAS, or the local user database to provide port-based access control. Port-based access control specifies whether devices that are connected to the switch ports are allowed access to the network. The IEEE 802.1X feature (also known as Dot1X) and Captive Portal feature use RADIUS or the local user database to control network access. IEEE 802.1X can also use the IAS to authenticate users. For information about IEEE 802.1X, see "Configuring 802.1X and Port-Based Security" on page 505. For information about Captive Portal, see "Configuring a Captive Portal" on page 445. The RADIUS server can provide VLAN assignments to devices connected to the switch ports. For information about RADIUS-assigned VLANs, see "Dynamic VLAN Creation" on page 510. Default Management Security Values By default, the only management access to the switch is through the console port, and no authentication is required. Table 9-2 describes the default settings for the management access features. Table 9-2. Management Security Default Values Management Security Default Feature Management Access No access profiles are configured. Control List (ACL) Password management Password minimum length is enabled, and the minimum features password length is 8 characters. Password aging, limiting the number consecutive passwords before reuse, and limiting the number of allowed consecutive login attempts are disabled. 178 Controlling Management Access