Dell PowerConnect 7048P User Manual - Page 975

Command Purpose area area-id nssa Configure the translator role of the NSSA. translator-role {always | • always - The router assumes the role of the translator candidate} when it becomes a border router. • candidate - The router can participate in the translator election process when it attains border router status. area area-id nssa translator-stab-intv integer Configure the translator stability interval of the NSSA. The integer variable is the period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. (Range: 0-3600) area area-id nssa default- Configure the metric value and type for the default route information-originate advertised into the NSSA. The metric type can be [metric metric-value] comparable (nssa-external 1) or non-comparable (nssa[metric-type metric-type- external 2). value] area area-id nssa no-redistribution Prevent learned external routes from being redistributed to the NSSA. exit Exit to Global Config mode. exit Exit to Privileged EXEC mode. show ip ospf area area-id View the configuration and status of an OSPF area. Configuring Virtual Links Beginning in Privileged EXEC mode, use the following commands to configure OSPF Virtual Links. Command configure router ospf area area-id virtual-link neighbor-id Purpose Enter global configuration mode. Enter OSPF configuration mode. Create the OSPF virtual interface for the specified areaid and neighbor router. The neighbor-id variable is the IP address of the neighboring router. Configuring OSPF and OSPFv3 975