Dell PowerConnect 7048P User Manual - Page 512

Table 19-1. IEEE 802.1X Monitor Mode Behavior (Continued) Case Sub-case Unauth VLAN enabled RADIUS Timeout Default behavior Unauth VLAN enabled EAPOL Timeout Default behavior Regular Dot1x Port State: Permit VLAN: Unauth Port State: Deny Port State: Deny Port State: Deny Guest VLAN enabled Port State: Permit VLAN: Guest MAB Success Case Port State: Permit VLAN: Assigned Filter: Assigned MAB Fail Case Port State: Deny Dot1x Monitor Mode Port State: Permit VLAN: Unauth Port State: Permit VLAN: Default Port State: Permit VLAN: Unauth Port State: Permit VLAN: Default Port State: Permit VLAN: Guest Port State: Permit VLAN: Assigned Filter: Assigned Port State: Permit VLAN: Default Supplicant Timeout Port State: Deny Port State: Deny How Does the Authentication Server Assign DiffServ Filters? The PowerConnect 7000 Series switches allow the external 802.1X Authenticator or RADIUS server to assign DiffServ policies to users that authenticate to the switch. When a host (supplicant) attempts to connect to the network through a port, the switch contacts the 802.1X authenticator or RADIUS server, which then provides information to the switch about which DiffServ policy to assign the host (supplicant). The application of the policy is applied to the host after the authentication process has completed. 512 Configuring 802.1X and Port-Based Security