Dell PowerConnect 7048P User Manual - Page 902

Configuring Route Table Entries and Route Preferences Beginning in Privileged EXEC mode, use the following commands to configure IRDP settings. Command Purpose configure Enter global configuration mode. ip route default Configure the default route. nextHopRtr [preference ] • nextHopRtr - IP address of the next hop router. • preference - Specifies the preference value (administrative distance) of an individual static route. (Range: 1-255) ip route ip-addr {subnetmask | prefix length } {nextHopRtr | null} [preference ] Configure a static route. Use the keyword null instead of the next hop router IP address to configure a static reject route. • ip-address - IP address of destination interface. • subnet-mask - Subnet mask of destination interface. • prefix-length - Length of prefix. Must be preceded with a forward slash (/). (Range: 0-32 bits) • nextHopRtr - IP address of the next hop router. • null - Specifies that the route is a static reject route. • preference - Specifies the preference value (administrative distance) of an individual static route. (Range: 1-255) ip route distance integer Set the default distance (preference) for static routes. Lower route preference values are preferred when determining the best route. exit Exit to Privileged EXEC mode. 902 Configuring IP Routing