Dell PowerConnect 7048P User Manual - Page 679

Enabling ISDP on a Port Beginning in Privileged EXEC mode, use the following commands to enable ISDP on a port. Command configure interface interface isdp enable exit exit show isdp interface all Purpose Enter Global Configuration mode. Enter interface configuration mode for the specified interface. Administratively enable ISDP on the switch. Exit to Global Config mode. Exit to Privileged Exec mode. View the ISDP mode on all interfaces. Viewing and Clearing ISDP Information Beginning in Privileged EXEC mode, use the following commands to view and clear the contents of the ISDP table and to view and clear ISDP statistics. Command show isdp entry {all | deviceid} show isdp neighbors clear isdp table show isdp traffic clear isdp counters Purpose View information about all entries or a specific entry in the ISDP table. View the neighboring devices discovered through ISDP. Clear all entries, including discovered neighbors, from the ISDP table. View ISDP statistics. Reset all ISDP statistics to zero. Discovering Network Devices 679