Dell PowerConnect 7048P User Manual - Page 753

Configuring GARP Timers and GMRP Beginning in Privileged EXEC mode, use the following commands to configure the GARP timers and to control the administrative mode GMRP on the switch and per-interface. Command Purpose configure Enter global configuration mode. garp timer {join | leave | Adjust the GARP application join, leave, and leaveall leaveall} timer_value GARP timer values The timer_value variable is in centiseconds. The range is 10-100 for join, 20-600 for leave, and 200-6000 for leaveall. gmrp enable Enable GMRP globally on the switch. interface interface Enter interface configuration mode for the specified port or LAG. The interface variable includes the interface type and number, for example gigabitethernet 1/0/3. For a LAG, the interface type is port-channel. You can also specify a range of ports with the interface range command, for example, interface range gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11, and 12. gmrp enable Enable GMRP on the interface or range of interfaces. exit Exit to Global Config mode. exit Exit to Privileged EXEC mode. show gmrp configuration View the administrative status of GMRP on the switch and all interfaces. Configuring L2 Multicast Features 753