Dell PowerConnect 7048P User Manual - Page 264

Configuring Email Alerts for Log Messages Beginning in Privileged EXEC mode, use the following commands to configure email alerts so that log messages are sent to the specified address. Command Purpose configure Enter Global Configuration mode. logging email [severity] Enable email alerting and determine which non-critical log messages should be emailed. Including the severity value sets the lowest severity for which log messages are emailed. These messages are collected and sent in a single email at the configured log duration. severity - (Optional) Enter the number or name of the severity level for non-critical messages. Log messages at or above this severity level are emailed. For information about severity levels, see Table 10-1. Log messages below the specified level are not emailed. logging email urgent {severity | none} Determine which log messages are critical and should be sent in a single email as soon as they are generated. severity - (Optional) Enter the number or name of the severity level for critical messages. For information about severity levels, see Table 10-1. logging email logtime Specify how often to send the non-critical email alerts that minutes have been collected. . The valid range is 30 - 1440 minutes. logging email messagetype {urgent | nonurgent | both} to-addr email-address Specify the email address of the recipient for log messages. logging email from-addr Specify the email address of the sender, which is the email-address switch. logging email messagetype {urgent | nonurgent | both} subject subject Specify the text that will appear in the subject line of email alerts sent by the switch. 264 Monitoring and Logging System Information