Dell PowerConnect 7048P User Manual - Page 1104

DiffServ Policy Attributes Configuration Beginning in Privilege Exec mode, use the following commands to configure policy attributes and view related information. CLI Command Description configure Enter global configuration mode. policy-map policy-map-name Enter Policy Map Configuration mode for the specified policy. class class-name Create an instance of a class definition within the specified policy for the purpose of defining treatment of the traffic class through subsequent policy attribute statements. Also enters PolicyClass-Map Configuration mode for the policy-classmap instance. assign-queue queue-id Modify the queue ID (range: 0-6) to which the associated traffic stream is assigned. police-simple {datarate Establish the traffic policing style for the specified burstsize conform-action class. The simple form of the police command uses {drop | set-cos-transmit cos | a single data rate and burst size, resulting in two set-prectransmit cos | set-dscp- outcomes: conform and nonconform. transmit dscpval | transmit} [violateaction {drop | set-costransmit cos | set-prectransmit cos | set-dscp- • datarate - Data rate in kilobits per second (kbps). (Range: 1-4294967295) • burstsize - Burst size in Kbps (Range: 1-128) transmit dscpval | transmit}]} • conform action - Indicates what happens when the packet is conforming to the policing rule: it could be dropped, it could have its COS modified, it could have its IP precedence modified, or it could have its DSCP modified. The same actions are available for packets that do not conform to the policing rule. • cos - Class of Service value. (Range: 0-7) • dscpval - DSCP value. (Range: 0-63 or a keyword from this list, af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef) 1104 Configuring Differentiated Services